HELTUN - Z-Wave Thermostat For Electric Heating (White)

Connection with Z-Wave

Energy saving

Easy to install

169,99 Incl. Vat

Out of stock

SKU HE-HT01-WWG-834 Categories ,

WHEN YOUR COMFORT MATTERS

When considering thermal comfort, what aspects are the most important?

Is it general room temperature?

Floor temperature?

Or may be something else?

Whatever the need, HELTUN guarantees to take care of it 

ADDITIONAL SENSORS THAT HELP YOU SAVE ENERGY

When an electronic device carries out its function, a certain amount of heat is generated. As a result, the ambient temperature is usually reported incorrectly, with merely a 1.5-2.0 degrees Celsius precision. HELTUN engineers added two additional internal sensors that consider excess heat generated from the device itself, whilst a special compensating software calculates the ambient temperature with an incredible 0.2-0.3 degrees Celsius precision.

 INPUTS & OUTPUTS

You can connect an NTC temperature sensor to HELTUN thermostat (3m long and 3.5mm thick NTC sensor is included in the box) or use your existing sensor to control floor/roof temperatures. This sensor can be installed under the floorboard, on the roof or under the decking, allowing you to accurately measure the chosen surface temperature. It is fully compatible with NTC sensors from other manufacturers, so there is no need to replace existing sensors from your old thermostat when switching to HELTUN.

AUTOMATIC COMFORT CONTROL

Choose the functioning of temperature control based on floor, ambient or combined readings. The HELTUN Z-Wave thermostat can be fine-tuned to provide maximum comfort at all times. For example, if ambient temperature is within your set limits but floor temperature drops, the underfloor heating system will be switched on automatically. The system safeguards will not allow the temperatures to rise above or drop below the comfort level.

1) If control is based only on the ambient air sensor, the thermostat will regulate the ambient temperature, regardless of the floor temperature.

2) If control is based only on floor sensor, the thermostat will regulate the floor temperature, regardless of the ambient temperature.

3) If control is based on ambient sensor, but with floor temperature limits, the thermostat will maintain the specified temperature for air, but will not allow the floor temperature to deviate from the specified limits.

4) If control is based on floor sensor, but with ambient limits, the thermostat will maintain the specified floor temperature, but will not allow the ambient temperature to deviate from the specified limits.

SCREEN

HELTUN thermostat’s large LCD screen shows all the necessary information simultaneously and does not require any additional commands to access it.  

There is an instant access to information from all sensors: ambient room temperature, air humidity, data from the external sensor (e.g. floor, decking or roof temperature), current temperature settings, Thermostat’s operational mode, date and time.

Automatic screen brightness control seamlessly adjusts to the ambient light conditions, making it easy to read even in the dark.

Z-WAVE PLUS V2 (700) CERTIFIED

You can connect HELTUN devices to a Smart Home gateway/controller using the latest Z-Wave Plus V2 700 platform. HELTUN features advanced Smart Start technology for easy system integration, and the Security 2 (S2) framework with AES 256 encryption for safe data transfer.  

This thermostat is compatible with all Z-Wave certified controllers and devices that properly implement Z-Wave thermostat classes. Using a Z-Wave controller, you can manage all thermostat functions via a mobile application including temperature and mode changes, viewing accurate energy consumption charts, and much more.

You can associate HELTUN thermostat with any Z-Wave compatible ON/OFF switch, or other thermostat, to control different climate systems in a room. You can even connect motion sensors and change thermostat modes when people are detected in the house.

HELTUN devices are compatible with all Z-Wave frequencies for different countries (Europe, Russia, Israel, Australia, USA, India, Hong Kong, China, Japan, Korea, …). The full list of Z-Wave regions and frequencies is available at Z-Wave Global Regions SiLabs page.

The correct frequency can be selected in the device menu.

HELTUN periodically releases new firmware with additional features and functionality which can be sent to devices via an encrypted OTA (Over-The-Air) update process.

Features

FeaturesDescription
Smart Start inclusionYes
Association control 10 devices from network
6 operation modes with individual temperature set pointCOM, ECO, VAC, DRY, TIME, MANUAL
4 time schedule for 7 days of the weekMorning, Day, Evening, Night
Choosing a temperature sensor for operation
  • Floor temperature only
  • Air temperature only
  • Floor + Air temperature
  • Power regulator (Automatic ON/OFF timer)
Usable with different NTC-sensor (1kOhm – 100kOhm)Yes
Temperature sensors calibrationYes
Temperature set intervals4.0°C to 37.0°C
Temperature limiter40.0°C
Choosing a temperature hysteresis0.1°C – 9.5°C
Choosing a degree Celsius / Fahrenheit
Adjustable LCD brightnessAuto or Manual
LCD standby modeYes
Child lock (touch buttons lock)Yes
Consumption meterYes
Factory resetYes
OTA function (Firmware update over the air)Yes

Delivery Information

CarriersDelivery Time
GLS – Standard
  • 3-4 days (Europe)
  • 4-7 days (Worldwide)
  • Product sold out = 5 extra working days
DHL – Express
  • 1-2 days (Europe)
  • 2-4 days (Worldwide)
  • Product sold out = 5 extra working days
CarriersPriceShipping costs per country
GLS – Standard€ 10,89Belgium, Netherlands, Luxembourg, Germany, Austria, Poland, Croatia, Romania, Slovenia, Slovakia, Czech and Hungary

Free shipment for orders higher than 500 euros

GLS – Standard€ 14.52France, UK, Ireland, Spain, Portugal, Italy, Denmark, Greece, Sweden, Finland, Estonia, Latvia, Lithuania, Andorra, Bulgaria, Cyprus, Gibraltar, Liechtenstein, Malta, Monaco and San Marino

Free shipment for orders higher than 500 euros

DHL – Express€ 18,03Belgium, Netherlands, Luxembourg France, Germany, UK, Ireland, Spain, Portugal, Italy, Denmark, Poland, Croatia, Romania, Greece, Bulgaria, Sweden, Finland, Estonia, Latvia, Lithuania, Andorra, Cyprus, Gibraltar, Liechtenstein, Luxemburg, Malta, Monaco, San Marino and Slovenia
DHL – Express€ 28.92Canada, Mexico, US, Bahamas, Bermuda
DHL – Express € 42.23Serbia, Russia, Ukraine, Norway, Turkey, Morocco, Oman, Australia, Singapore, Albanie, Azerbedjan, Bahrain, Belarus, Belize, Bolivia, Bosnia and Herzegovina, Brazil, Cambodia, Cayman Islands, Chili, China, Colombia, Costa Rica, Cuba, Egypt, Fiji, Georgia, Greenland, Grenada, Hongkong, Iceland, India, Indonesia, Iran, Irak, Japan, Jordan, Kazachstan, Kuwait, Kyrgyzstan, Lebanon, Macau, Macedonia, Malaysia, Malediven, Mauritius, Moldova, Montenegro, New  Zealand, Nigeria, Panama, Filippijnen, Puerto Rico, Qatar, Saudi Arabia, Seychelles, Zuid-Afrika, Zuid-Korea, Sri Lanka, Switzerland, Taiwan, Tajikstan, Thailand, Tunisia, Ukraine, UAE, Uzbekistan, Vietnam and Yemen

Reviews

There are no reviews yet.

Be the first to review “HELTUN – Z-Wave Thermostat For Electric Heating (White)”

HELTUN - Z-Wave thermostat for electric heating (White)

Download